Bottle washer accessories · Stainless steel
These bottle washer accessories turn the machine into a complete washing station: a soak sink for hard-to-clean containers, a table on each side to load and drain, and a rolling cart to store baskets and manifolds. No more baskets on the floor, and every task happens at working height.
Reply within one business day. Or call +1 (450) 651-0909 (France: +33 6 51 89 05 08).
The washing station
A washer on its own washes. What slows production down is everything around it: baskets on the floor, bottles draining on a piece of cardboard, the label that won’t come off and gets scraped by hand. The accessories fix those tasks, one by one.
With a table on each side, the Multi-Function Washer sits in the middle of a continuous station: the operator loads on the left, starts the cycle, and takes the clean basket out on the right while the next one washes.
Not sure which washer to build the station around? Compare our commercial bottle washers, from the countertop Multi Compact Washer to the Industrial Container Washer.
Stainless steel tables
Same steel, same finish as the machine. Choose by the space you have and what comes out of the washer.
It hooks directly onto the side of the washer, left or right. Raised edges: the water stays on the table, not on the floor.
On its own legs, to place wherever you want: soak station, basket prep or filling area.
The size of the work table, with hot-air blowers that dry the inside of plastic containers: 5-gallon (20 L) jugs and pails.
On glass, a drying table is rarely useful. A glass bottle drains well on a work table. The drying table is for when water stays at the bottom of a plastic container and you fill right after washing. To dry in volume, see the Multi-Function Dryer, a separate machine the same size as the washer.
Storage
Each container format has its own basket and manifold (water diffuser). Once you have three or four, they need a place. The cart keeps them flat and brings them next to the machine when you change formats.
Your baskets and manifolds are made for your containers: see our custom manifolds and baskets.
Pre-wash
Returnable bottles, stuck-on labels, dried deposits: some containers need to soak before they go into the machine. The soak sink handles that, and the EDV option fills it with the water the washer used to send down the drain.
The EDV is an additional drain valve. At the end of the wash step, it sends the hot, soapy water to the sink, a tub or a tank instead of the drain. Incoming containers soak in it while the machine works. All the water from the cycle is used twice: once to wash, once to soak.
Soaking, more than the machine, decides whether labels come off. For labels with stubborn glue, the label maker often recommends an alkaline solution: the sink is for that too.
Custom baskets
A new format does not call for a new machine. It calls for a basket and a manifold (water diffuser) designed for that container, added to your washer.
Send us a photo and the dimensions of your container (height, diameter, neck): we will tell you which basket you need.
Inside the machine
To wash glassware, small parts and trays without changing machines.
Passivated stainless steel basket with lid, holder and wash arm. It replaces the manifold and washes glassware, lids, caps, gaskets and small parts. It takes standard glass racks. Available for the Multi-Function Washer and the compact washer. Ref. OPT-MFW-BSKTKIT · OPT-COMPACT-BSKTKIT.
Stainless steel lid that holds light containers in place during the cycle: small plastic bottles, caps, parts that float. Ref. BTR-COV-PS-REG (regular size) · BTR-COV-PS-OVER (large size).
Holder, collar and lower wash arm to run standard restaurant trays through the washer. Ref. OPT-PS-DISHKIT.
Set of four swivel casters with brakes: the washer moves for floor cleaning or from one station to another. Ref. OPT-CSTWHL.
Who builds them
Questions
Want to know what fits in your space? Send us your dimensions.
Get a recommendationThe side work table if you want a continuous station attached to the machine, one on each side to load and unload. The freestanding table if space is tight next to the washer, or for a soak station. The drying table only for plastic containers you fill right after washing.
About 14.4 ft (4.4 m) of floor length for the Multi-Function Washer with a work table on each side. Send us your floor plan: we check it before quoting.
Almost never. Glass drains well on a work table. The drying table is for plastic, where water stays at the bottom of the container.
Through the EDV option, an additional drain valve mounted on the washer. It sends the hot, soapy wash water to the sink instead of the drain. Close the valve when the tub is full, or install an overflow.
They are ordered on the same quote, but ship separately from the washer crate.
Yes, with the basket and manifold designed for that format. Send us a photo and the dimensions of the container: we will tell you which one you need. The Multi-Function Washer handles 0.17 oz to 16 gal (5 ml to 60 L), in glass, plastic, aluminium or stainless steel.
The price depends on the station setup. Tell us which washer you have or are considering and what you wash: we reply with a complete quote.
Free quote
Tell us which washer you have or are considering, what you wash and the space available. We reply with the station setup and a quote.
+1 (450) 651-0909 main line
1 (844) 651-0909 (toll-free in Canada and the US) · France: +33 6 51 89 05 08 · WhatsApp
Quotes: sale[@]aquatech-bm.com
AquaTech Leasing & Management Inc. · 71 J.-A. Bombardier, Boucherville, Quebec, Canada J4B 8P1
Your accessories quote
We do not publish prices: every quote is set for your station. A specialist replies within one business day; your information is never sold.
