Clean research laboratory equipment respecting health and hygiene laws and standards thanks to thorough washing with a bottle washing machine

Laboratory glassware washers for research, Pharmaceutical & Biotech Laboratories

90+ Countries Served | 20 Years Building Washers | CSA SPE-1000 Inspected · CE Marked | Made in Canada

Automated washing and rinsing systems for laboratory bottles, flasks, containers and reusable glassware, with configurable cycles, chemical dosing and custom racks.

Key Benefits

✓ Consistent & Repeatable Cleaning Cycles
✓ Controlled Chemical Dosing & Temperature
✓ Custom Racks & Spray Manifolds
✓ 304 and 316L Stainless Steel Construction

90+ Countries Served | 20 Years Building Washers | CSA SPE-1000 Inspected · CE Marked | Made in Canada

Automated Laboratory Glassware Cleaning

Laboratory glassware and reusable containers can accumulate chemical residues, organic material and other contaminants during laboratory processes. Manual cleaning can be time-consuming and difficult to standardize.

Aquatech BM laboratory glassware washers automate the washing and rinsing process to provide controlled, consistent and repeatable cleaning cycles.

From reagent bottles and media bottles to Erlenmeyer flasks, test tubes and specialized laboratory containers, our systems can be configured to suit your application.

What Can a Laboratory Glassware Washer Clean?

Our bottle washer efficiently cleans the most popular bottle types currently in use by labs, including:

 

✓ Flacons
✓ Laboratory Flasks
✓ Boston Round Bottles
✓ Winchester Bottles
✓ Reagent Bottles
✓ Graduated Bottles
✓ Erlenmeyer Flasks
✓ Florence Flasks
✓ Boiling Flasks
✓ Narrow-Neck Bottles
✓ Wide-Mouth Bottles
✓ Laboratory Jars
✓ Test Tubes
✓ Other Custom Containers

Media Bottles
Laboratory bottle washer

How the Wash Cycle Works

Dirty glassware can ruin an experiment, and residue is not always visible. Each container sits upside down on its own nozzle: water enters through the neck at up to 24 psi (1.7 bar) per nozzle and reaches the bottom and shoulders, where a brush does not. Every cycle runs the same way: wash, rinse, then a final rinse above 190 °F (88 °C).

Set Cycles, Dosing and Rinse Temperature on the Touchscreen

The Schneider touchscreen lets you configure cycles, chemical dosing, rinse temperature and alarms, and shows the total number of washes for the day. The same settings apply to every batch, whoever runs the machine.

From a 0.17 oz (5 mL) Vial to a 16-gal (60 L) Carboy

Hand washing is slow and hard to standardize; outsourcing is expensive. The Multi-Function Washer takes containers from 0.17 oz (5 mL) to 16 gal (60 L) through a 22 in (559 mm) free chamber opening: vials, media bottles, flasks and carboys in the same machine. It washes 30 bottles of 750 mL or 4 carboys per cycle, from 100 to 1,200 containers per hour depending on format.

Designed for a Wide Range of Laboratory Materials

Glass · Borosilicate Glass · Quartz · Crystal · Plastic · Polypropylene · Polyethylene · Polycarbonate · PTFE · Aluminum · Stainless Steel · Ceramic

The Aquatech BM laboratory washer can be configured to accommodate a wide range of reusable laboratory containers and glassware.

Rack design, spray configuration, water temperature and cleaning parameters can be adapted to the material, shape, size and cleaning requirements of your containers.

For specialized applications, custom racks and spray manifolds can be engineered to provide effective and repeatable cleaning while protecting the integrity of the containers.

Material compatibility depends on the container construction, cleaning chemistry, temperature and application requirements. Contact our team to determine the appropriate configuration for your application.

Stainless steel bottle washer

Repeatable Results, Cycle After Cycle

As research becomes more precise, glassware must not become a source of variability. A machine runs the same cycle every time: same time, same temperature, same dosing.

Programs Set to Your Lab's Standards

Countertop or Floor-Standing

For small batches, the compact bottle washer sits on a bench and washes 16 bottles of 1 L per cycle (27.41 × 20.67 × 31.79 in / 696 × 525 × 807 mm). For larger volumes and carboys, the Multi-Function Washer stands on the floor (28.2 × 36 × 62.2 in / 715 × 913 × 1,580 mm).

Built in 304 and 316L Stainless Steel

304 and 316L stainless steel resists corrosion, detergents and disinfectants. Welds are sanitary TIG welds made with back-purging, so the bead stays smooth inside and out. Components are passivated and electropolished, the same finishing processes used in pharmaceutical equipment.

Every machine is inspected to CSA / UL/ULC / SPE-1000 and carries the CE mark. Expected service life: 10 to 20+ years.

Which Machine for Your Lab?

One of the reasons laboratories use glass is its strength and transparency. The Aquatech-BM multifunction bottle washer is efficient this and affordable.

It ensures optimal cleanliness and sterilization of glass containers. Wash cycles remove all traces of residue, contaminants, or bacteria that could affect test results.

Lab Glassware Washer
Your glasswareMachinePer cycle
Vials, media bottles, reagent bottles, flasks, from 0.17 oz (5 mL)Multi-Function WasherUp to 64 containers, depending on the manifold set (M-9 to M-64)
Carboys up to 16 gal (60 L)Multi-Function Washer, see our 5-gallon container washer page4 carboys
Small batches, limited bench spaceCompact bottle washer16 bottles of 34 fl oz (1 L)
5-gal (19 L) pails and larger containersIndustrial container washer9 to 12 pails, depending on diameter
laboratory bottle washer

Who Builds These Machines

AquaTech BM designs and builds its container washer-sterilizers in Boucherville, Quebec, and has done so for 20 years. Every machine is inspected to CSA SPE-1000, CE marked, and shipped with a startup kit, a remote diagnostics connection and a one-year parts and labour warranty. In service in more than 90 countries. Reference calls available on request: see our references.

71 J.-A. Bombardier, Boucherville (Quebec) Canada J4B 8P1 · +1 (450) 651-0909 · 1 (844) 651-0909

Lab Glassware Washer FAQ

  • What is the smallest and largest container it takes? From 0.17 oz (5 mL) vials to 16-gal (60 L) carboys, through a 22 in (559 mm) chamber opening.
  • Will it fit my glassware? Manifolds and baskets are built for your containers, passivated and electropolished. Send us the neck diameter, body diameter and height; we confirm the set that fits.
  • What temperature is the final rinse? Above 190 °F (88 °C), adjustable on the touchscreen.
  • What power does it need? Three-phase, 50 A, 50/60 Hz, for North American and European grids; up to 60 A on request. The cable is supplied.
  • Is it inspected? Every machine is inspected to CSA SPE-1000 and carries the CE mark.
  • What is the warranty? One year, parts and labour. Expected service life: 10 to 20+ years.